#!/usr/bin/env """ make line datacubes and integrated maps and compare applying continuum selfcal NOTE: this is intended to be an interactive, iterative process so this is more a log that should be run by cutting and pasting into casa rather than as an executable script search "CHANGEME" for variables to be changed 10/9/15 MCA """ # ================================== Setup ===================================== # III_1007 M0.0 II field = 5 # CHANGEME fitspw = '2,3,4,7,8,9' # line-free channels for fitting continuum linespw = '0,1,3,5,6,8' # line spectral windows (C18O, 13CO, CN) robust = 0.5 # CHANGEME imsize = [640,640] cell = '0.03arcsec' imagermode = 'csclean' outframe = 'lsrk' veltype = 'radio' width = '1.0km/s' start = '-3km/s' nchan = 16 xc = 303 # CHANGEME yc = 300 # CHANGEME in_a = 80 out_a = 120 aper = 0.5 boxwidth = 300. box = rg.box([xc-boxwidth,yc-boxwidth],[xc+boxwidth,yc+boxwidth]) # ================ Create continuum subtracted line datasets =================== uvcontsub(vis = 'f'+str(field)+'.vis', # full vis file for this field spw = linespw, # line spw (for cont subtraction) fitspw = fitspw, # cont spw combine = 'spw', solint = 'int', fitorder = 1, want_cont = False) # should not be changed. # ============================== 13CO line ===================================== # first try on 13CO line as thats going to be the brightest # os.system('rm -rf f'+str(field)+'_13co32*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_13co32', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '330.58797GHz', niter = 500, threshold = 0, interactive = False, mask = 'f5_cont_mask.crtf', imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # used continuum region in automated mode # can't see emission # export cube to fits file fbase = 'f'+str(field)+'_13co32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_13co32.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # can't see emission # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_13co32.mom0*') immoments(imagename = 'f'+str(field)+'_13co32.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_13co32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[2km/s,6km/s]')) # CHANGEME (based on above analysis!!) # export to fits file fbase = 'f'+str(field)+'_13co32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_max = imstat(imagename = 'f'+str(field)+'_13co32.mom0')['max'][0] im_rms = imstat(imagename = 'f'+str(field)+'_13co32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_13co32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 91.16 mJy, rms = 33.12 mJy, S/N = 2.8 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_13co32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_13co32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_13co32.mom0_cropped.image', infile = 'f'+str(field)+'_13co32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_13co32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_13co32.mom0_cropped.fits') ''' Measuring COG for M/f5_13co32.mom0_cropped.fits Assuming object center (300.0,300.0) Background: 0.40 mJy/beam km/s RMS in annulus 4.0-6.0 arcsec = 32.10 mJy/beam km/s i radius flux err snr (asec) (mJy) (mJy) 0 0.10 16.48 8.75 1.9 1 0.20 33.20 22.55 1.5 2 0.30 43.70 36.53 1.2 <-- ND 3 0.40 69.35 41.37 1.7 4 0.50 91.16 49.68 1.8 5 0.60 92.98 62.00 1.5 6 0.70 113.17 61.96 1.8 7 0.80 143.59 72.87 2.0 8 0.90 144.24 82.07 1.8 9 1.00 96.20 90.49 1.1 F = 144.24 mJy E = 82.07 mJy S = 1.76 D = 1.80 arcsec ''' # ======================== C18O line ========================================== # don't bother with selfcal as it doesn't help... # os.system('rm -rf f'+str(field)+'_c18o32*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_c18o32', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '329.33055GHz', niter = 500, threshold = 0, interactive = False, mask = 'f5_cont_mask.crtf', imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # could not see line clearly, so just cleaned lightly # within continuum region for all channels at once # export cube to fits file fbase = 'f'+str(field)+'_c18o32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_c18o32.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # cannot see line # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_c18o32.mom0*') immoments(imagename = 'f'+str(field)+'_c18o32.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_c18o32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[2km/s,6km/s]')) # export to fits file fbase = 'f'+str(field)+'_c18o32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_rms = imstat(imagename = 'f'+str(field)+'_c18o32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_c18o32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = -74.96 mJy, rms = 41.70 mJy, S/N = -1.8 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_c18o32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_c18o32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_c18o32.mom0_cropped.image', infile = 'f'+str(field)+'_c18o32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_c18o32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_c18o32.mom0_cropped.fits') ''' Measuring COG for M/f5_c18o32.mom0_cropped.fits Assuming object center (300.0,300.0) Background: -0.91 mJy/beam km/s RMS in annulus 4.0-6.0 arcsec = 41.23 mJy/beam km/s i radius flux err snr (asec) (mJy) (mJy) 0 0.10 -15.02 10.54 -1.4 1 0.20 -48.18 26.01 -1.9 2 0.30 -80.03 39.82 -2.0 <-- ND 3 0.40 -80.58 60.88 -1.3 4 0.50 -74.96 83.07 -0.9 5 0.60 -79.08 77.65 -1.0 6 0.70 -84.88 112.52 -0.8 7 0.80 -85.36 118.79 -0.7 8 0.90 -97.30 105.26 -0.9 9 1.00 -104.39 143.24 -0.7 F = -15.02 mJy E = 10.54 mJy S = -1.42 D = 0.20 arcsec ''' # ======================== Image CN ================== # don't bother with selfcal as it doesn't help... # os.system('rm -rf f'+str(field)+'_cn32_b4sc*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_cn32_b4sc', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '340.24777GHz', niter = 500, threshold = 0, interactive = False, mask = 'f5_cont_mask.crtf', imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # could not see line clearly, so just cleaned lightly # within continuum region for all channels at once # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_cn32_b4sc.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_cn32.mom0*') immoments(imagename = 'f'+str(field)+'_cn32_b4sc.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_cn32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[1km/s,7km/s]')) # export to fits file fbase = 'f'+str(field)+'_cn32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_rms = imstat(imagename = 'f'+str(field)+'_cn32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_cn32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 46.73 mJy, rms = 31.35 mJy, S/N = 1.5 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_cn32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_cn32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_cn32.mom0_cropped.image', infile = 'f'+str(field)+'_cn32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_cn32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_cn32.mom0_cropped.fits') # CANNOT SEE EMISSION SO JUST USED 1" APERTURE # 5 0.500 877 48.42 67.352 0.7 78.48 31.629 2.5 0.999