#!/usr/bin/env """ make line datacubes and integrated maps and compare applying continuum selfcal NOTE: this is intended to be an interactive, iterative process so this is more a log that should be run by cutting and pasting into casa rather than as an executable script search "CHANGEME" for variables to be changed 10/9/15 MCA """ # ================================== Setup ===================================== # III_1006 M5.0 II # 15:58:02.52 -37:36:02.5 field = 47 # CHANGEME fitspw = '2,3,4,7,8,9' # line-free channels for fitting continuum linespw = '0,1,3,5,6,8' # line spectral windows (C18O, 13CO, CN) robust = 0.5 # CHANGEME imsize = [640,640] cell = '0.03arcsec' imagermode = 'csclean' outframe = 'lsrk' veltype = 'radio' width = '1.0km/s' start = '-3km/s' nchan = 16 xc = 330 # CHANGEME yc = 307 # CHANGEME in_a = 80 out_a = 120 aper = 1.25 boxwidth = 300. box = rg.box([xc-boxwidth,yc-boxwidth],[xc+boxwidth,yc+boxwidth]) # ================ Create continuum subtracted line datasets =================== uvcontsub(vis = 'f'+str(field)+'.vis', # full vis file for this field spw = linespw, # line spw (for cont subtraction) fitspw = fitspw, # cont spw combine = 'spw', solint = 'int', fitorder = 1, want_cont = False) # should not be changed. # ============================== 13CO line ===================================== # first try on 13CO line as thats going to be the brightest # os.system('rm -rf f'+str(field)+'_13co32*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_13co32', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '330.58797GHz', niter = 2000, threshold = 0, interactive = True, imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_13co32.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # export cube to fits file fbase = 'f'+str(field)+'_13co32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_13co32.mom0*') immoments(imagename = 'f'+str(field)+'_13co32.image', outfile = 'f'+str(field)+'_13co32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[3km/s,8km/s]')) # can see emission; max snr # export to fits file fbase = 'f'+str(field)+'_13co32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_max = imstat(imagename = 'f'+str(field)+'_13co32.mom0')['max'][0] im_rms = imstat(imagename = 'f'+str(field)+'_13co32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_13co32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 832.60 mJy, rms = 33.79 mJy, S/N = 24.6 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_13co32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_13co32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_13co32.mom0_cropped.image', infile = 'f'+str(field)+'_13co32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_13co32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_13co32.mom0_cropped.fits') ''' Measuring COG for M/f47_13co32.mom0_cropped.fits Assuming object center (300.0,300.0) Background: -1.26 mJy/beam km/s RMS in annulus 4.0-6.0 arcsec = 35.52 mJy/beam km/s i radius flux err snr (asec) (mJy) (mJy) 0 0.10 75.13 9.21 8.2 1 0.20 227.10 24.23 9.4 2 0.30 405.25 41.31 9.8 3 0.40 555.29 58.21 9.5 4 0.50 699.67 71.45 9.8 5 0.60 810.55 87.05 9.3 6 0.70 891.39 98.11 9.1 7 0.80 924.04 110.34 8.4 8 0.90 907.92 95.43 9.5 9 1.00 872.06 129.60 6.7 10 1.10 863.73 110.86 7.8 11 1.20 846.62 113.71 7.4 12 1.30 818.69 139.29 5.9 13 1.40 820.72 156.07 5.3 14 1.50 835.04 180.39 4.6 F = 924.04 mJy E = 110.34 mJy S = 8.37 D = 1.60 arcsec ''' # ======================== C18O line ========================================== # don't bother with selfcal as it doesn't help... # os.system('rm -rf f'+str(field)+'_c18o32*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_c18o32', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '329.33055GHz', niter = 500, threshold = 0, interactive = False, mask = 'f47_cont_mask.crtf', imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # couldn't see line, just cleaned in automated mode # in continuum region for all channels # export cube to fits file fbase = 'f'+str(field)+'_c18o32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_c18o32.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_c18o32.mom0*') immoments(imagename = 'f'+str(field)+'_c18o32.image', outfile = 'f'+str(field)+'_c18o32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[3km/s,8km/s]')) # can't see emission, using same velocity range as 13CO # export to fits file fbase = 'f'+str(field)+'_c18o32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_rms = imstat(imagename = 'f'+str(field)+'_c18o32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_c18o32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 237.88 mJy, rms = 42.41 mJy, S/N = 5.6 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_c18o32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # export cube to fits file fbase = 'f'+str(field)+'_c18o32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_c18o32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_c18o32.mom0_cropped.image', infile = 'f'+str(field)+'_c18o32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_c18o32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_c18o32.mom0_cropped.fits') ''' Measuring COG for M/f47_c18o32.mom0_cropped.fits Assuming object center (300.0,300.0) Background: 0.31 mJy/beam km/s RMS in annulus 4.0-6.0 arcsec = 40.43 mJy/beam km/s i radius flux err snr (asec) (mJy) (mJy) 0 0.10 -1.69 10.67 -0.2 1 0.20 9.98 30.12 0.3 2 0.30 35.75 40.23 0.9 <-- ND 3 0.40 50.83 59.70 0.9 4 0.50 43.48 70.95 0.6 5 0.60 30.49 101.68 0.3 6 0.70 54.83 95.53 0.6 7 0.80 105.40 126.71 0.8 8 0.90 172.26 126.52 1.4 9 1.00 245.32 151.91 1.6 F = 245.32 mJy E = 151.91 mJy S = 1.61 D = 2.00 arcsec ''' # ======================== Image CN ================== # don't bother with selfcal as it doesn't help... # os.system('rm -rf f'+str(field)+'_cn32_b4sc*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_cn32_b4sc', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '340.24777GHz', niter = 2000, threshold = 0, interactive = True, imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_cn32_b4sc.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_cn32.mom0*') immoments(imagename = 'f'+str(field)+'_cn32_b4sc.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_cn32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[2km/s,8km/s]')) # CHANGEME (based on above analysis!!) # can see emission, gives best snr # export to fits file fbase = 'f'+str(field)+'_cn32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_rms = imstat(imagename = 'f'+str(field)+'_cn32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_cn32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 799.54 mJy, rms = 30.84 mJy, S/N = 25.9 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_cn32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_cn32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_cn32.mom0_cropped.image', infile = 'f'+str(field)+'_cn32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_cn32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_cn32.mom0_cropped.fits') ''' diameter total rms snr 1.8 959.20 138.266 6.9 diameter total rms snr 1.0 661.03 61.329 10.8 diameter peak rms snr 0.2 286.16 30.568 9.4 '''