#!/usr/bin/env """ make line datacubes and integrated maps and compare applying continuum selfcal NOTE: this is intended to be an interactive, iterative process so this is more a log that should be run by cutting and pasting into casa rather than as an executable script search "CHANGEME" for variables to be changed 10/9/15 MCA """ # ================================== Setup ===================================== # III_68 M1.0 II # BINARY field = 9 # CHANGEME fitspw = '2,3,4,7,8,9' # line-free channels for fitting continuum linespw = '0,1,3,5,6,8' # line spectral windows (C18O, 13CO, CN) robust = 0.5 # CHANGEME imsize = [640,640] cell = '0.03arcsec' imagermode = 'csclean' outframe = 'lsrk' veltype = 'radio' width = '1.0km/s' start = '-3km/s' nchan = 16 xc = 321 # CHANGEME yc = 312 # CHANGEME in_a = 80 out_a = 120 aper = 0.5 boxwidth = 300. box = rg.box([xc-boxwidth,yc-boxwidth],[xc+boxwidth,yc+boxwidth]) # ================ Create continuum subtracted line datasets =================== uvcontsub(vis = 'f'+str(field)+'.vis', # full vis file for this field spw = linespw, # line spw (for cont subtraction) fitspw = fitspw, # cont spw combine = 'spw', solint = 'int', fitorder = 1, want_cont = False) # should not be changed. # ============================== 13CO line ===================================== # first try on 13CO line as thats going to be the brightest # os.system('rm -rf f'+str(field)+'_13co32*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_13co32', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '330.58797GHz', niter = 500, threshold = 0, interactive = False, mask = 'f09_cont_mask.crtf', imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # used continuum region in automated mode # can see emission, but faint so not sure what is real # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_13co32.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # export cube to fits file fbase = 'f'+str(field)+'_13co32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_13co32.mom0*') immoments(imagename = 'f'+str(field)+'_13co32.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_13co32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[1km/s,7km/s]')) # CHANGEME (based on above analysis!!) # emission visible but peaks unclear, clearly in thise range though # export to fits file fbase = 'f'+str(field)+'_13co32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_max = imstat(imagename = 'f'+str(field)+'_13co32.mom0')['max'][0] im_rms = imstat(imagename = 'f'+str(field)+'_13co32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_13co32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 276.39 mJy, rms = 36.79 mJy, S/N = 7.5 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_13co32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_13co32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_13co32.mom0_cropped.image', infile = 'f'+str(field)+'_13co32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_13co32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_13co32.mom0_cropped.fits') ''' Measuring COG for M/f9_13co32.mom0_cropped.fits Assuming object center (300.0,300.0) Background: -0.78 mJy/beam km/s RMS in annulus 4.0-6.0 arcsec = 36.23 mJy/beam km/s i radius flux err snr (asec) (mJy) (mJy) 0 0.10 64.00 10.55 6.1 1 0.20 171.79 25.54 6.7 2 0.30 243.38 38.80 6.3 3 0.40 266.51 46.19 5.8 <-- levels off here 4 0.50 276.39 57.48 4.8 5 0.60 304.95 69.41 4.4 6 0.70 329.98 77.58 4.3 7 0.80 325.30 90.46 3.6 F = 329.98 mJy E = 77.58 mJy S = 4.25 D = 1.40 arcsec ''' # ======================== C18O line ========================================== # don't bother with selfcal as it doesn't help... # os.system('rm -rf f'+str(field)+'_c18o32*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_c18o32', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '329.33055GHz', niter = 500, threshold = 0, interactive = False, mask = 'f09_cont_mask.crtf', imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_c18o32.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # export cube to fits file fbase = 'f'+str(field)+'_c18o32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_c18o32.mom0*') immoments(imagename = 'f'+str(field)+'_c18o32.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_c18o32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[1km/s,7km/s]')) # can't see emission so using same as 13CO # export to fits file fbase = 'f'+str(field)+'_c18o32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_rms = imstat(imagename = 'f'+str(field)+'_c18o32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_c18o32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 146.95 mJy, rms = 43.64 mJy, S/N = 3.4 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_c18o32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_c18o32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_c18o32.mom0_cropped.image', infile = 'f'+str(field)+'_c18o32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_c18o32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_c18o32.mom0_cropped.fits') '''' Measuring COG for M/f9_c18o32.mom0_cropped.fits Assuming object center (300.0,300.0) Background: -1.78 mJy/beam km/s RMS in annulus 4.0-6.0 arcsec = 43.60 mJy/beam km/s i radius flux err snr (asec) (mJy) (mJy) 0 0.10 15.39 10.44 1.5 1 0.20 39.01 30.07 1.3 2 0.30 62.58 45.97 1.4 <-- ND 3 0.40 103.55 60.27 1.7 4 0.50 146.95 77.08 1.9 5 0.60 127.06 96.77 1.3 6 0.70 58.84 100.47 0.6 7 0.80 18.81 120.48 0.2 F = 146.95 mJy E = 77.08 mJy S = 1.91 D = 1.00 arcsec ''' # ======================== Image CN ================== # don't bother with selfcal as it doesn't help... # os.system('rm -rf f'+str(field)+'_cn32_b4sc*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_cn32_b4sc', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '340.24777GHz', niter = 500, threshold = 0, interactive = False, mask = 'f09_cont_mask.crtf', imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # emission very extended, not sure what is real # just lightly cleaned in continuum region # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_cn32_b4sc.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_cn32.mom0*') immoments(imagename = 'f'+str(field)+'_cn32_b4sc.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_cn32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[1km/s,6km/s]')) # CHANGEME (based on above analysis!!) # can see peaks, gives highest snr # export to fits file fbase = 'f'+str(field)+'_cn32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_rms = imstat(imagename = 'f'+str(field)+'_cn32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_cn32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 235.09 mJy, rms = 26.30 mJy, S/N = 8.9 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_cn32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_cn32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_cn32.mom0_cropped.image', infile = 'f'+str(field)+'_cn32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_cn32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_cn32.mom0_cropped.fits') ''' diameter total rms snr 1.0 236.99 63.596 3.7 diameter total rms snr 0.6 164.48 32.586 5.0 diameter peak rms snr 0.6 111.29 27.029 4.1 '''