#!/usr/bin/env """ split, clean, and self-cal continuum and line data NOTE: this is intended to be an interactive, iterative process so this is more a log that should be run by cutting and pasting into casa rather than as an executable script search "CHANGEME" for variables to be changed 10/9/15 MCA """ # ======================== Setup =========================== # LupusI_13 15:45:06.340 -34:17:38.198' field = 27 # CHANGEME file_ms = '../science_calibrated.ms' contspw = '2,3,4' contspw_w = [128,3840,1920] robust = 0.5 imsize = [640,640] cell = '0.03arcsec' imagermode = 'csclean' refant = 'DA52' # CHANGEME xc = 327 # CHANGEME yc = 317 # CHANGEME in_a = 80 out_a = 120 aper = 0.5 # CHANGEME boxwidth = 300. box = rg.box([xc-boxwidth,yc-boxwidth],[xc+boxwidth,yc+boxwidth]) # ======================= Split Off Continuum ======================== # split off field from full ms split(vis = file_ms, outputvis = 'f'+str(field)+'.vis', field = field, datacolumn = 'data') # split off continuum (take the large bw spw and average split(vis = 'f'+str(field)+'.vis', outputvis = 'f'+str(field)+'_cont.vis', spw = contspw, width = contspw_w, datacolumn = 'data') # plot uv-distance vs. amplitude plotms(vis='f'+str(field)+'_cont.vis', xaxis='uvdist',yaxis='amp', coloraxis='spw') # plotfile='f'+str(field)+'_ampuv_orig.png' # showgui=False, # highres=True, # overwrite=True) # source is resolved? # find antenna close to center of configuration # check pipeline log that this ant is OK plotants(vis='f'+str(field)+'_cont.vis') #, figfile='f'+str(field)+'_ants.png') # ================== Clean continuum before selfcal ================== # light clean (100 iterations) around BOTH sources # os.system('rm -rf f'+str(field)+'_cont_b4sc*') clean(vis = 'f'+str(field)+'_cont.vis', imagename = 'f'+str(field)+'_cont_b4sc', mode = 'mfs', psfmode = 'clark', niter = 100, threshold = '0.0mJy', interactive = True, mask = '', cell = cell, imsize = imsize, weighting = 'briggs', robust = robust, imagermode = imagermode) im_max = imstat(imagename = 'f'+str(field)+'_cont_b4sc.image')['max'][0] im_rms = imstat(imagename = 'f'+str(field)+'_cont_b4sc.image', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] print 'Peak = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_max, 1000*im_rms, im_max/im_rms) # Peak = 12.06 mJy, rms = 0.36 mJy, S/N = 33.2 # ======================== Best Continuum Map ================== # accidently erased self-cal code, but everything was fine and pcal1 was the best in the end applycal(vis = 'f'+str(field)+'_cont.vis', spw = '', gaintable = ['f'+str(field)+'_cont_pcal1'], # CHANGEME spwmap = [0,0,0], calwt = T, flagbackup = T) # deep clean, trying different robust weights # os.system('rm -rf f'+str(field)+'_cont_best*') clean(vis = 'f'+str(field)+'_cont.vis', imagename = 'f'+str(field)+'_cont_best', mode = 'mfs', psfmode = 'clark', niter = 2000, threshold = '0.0mJy', interactive = True, mask = '', cell = cell, imsize = imsize, weighting = 'briggs', robust = 0.5, # CHANGEME imagermode = imagermode) # placed mask around continuum contour # stopped after 200 iterations once the inside became green im_max = imstat(imagename = 'f'+str(field)+'_cont_best.image')['max'][0] im_rms = imstat(imagename = 'f'+str(field)+'_cont_best.image', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] bmaj = imhead(imagename = 'f'+str(field)+'_cont_best.image', mode="get", hdkey="beammajor") bmin = imhead(imagename = 'f'+str(field)+'_cont_best.image', mode="get", hdkey="beamminor") print 'Peak = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_max, 1000*im_rms, im_max/im_rms) print 'Beam = {0:.2f} x {1:.2f} arcsec'.format(bmaj.get('value'),bmin.get('value')) # robust = 0.5 # Peak = 14.15 mJy, rms = 0.34 mJy, S/N = 41.8 # Beam = 0.36 x 0.29 arcsec # save this to a fits file exportfits(imagename='f'+str(field)+'_cont_best.image', fitsimage='f'+str(field)+'_cont.fits') # measure flux # imview(raster=[{'file':'f'+str(field)+'_cont_best.image'}]) im_rms = imstat(imagename = 'f'+str(field)+'_cont_best.image', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_cont_best.image', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 15.83 mJy, rms = 0.34 mJy, S/N = 46.8 # re-center image on source and use get_flux.py to get COG flux ia.fromimage(outfile = 'f'+str(field)+'_cont_cropped.image', infile = 'f'+str(field)+'_cont.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_cont_cropped.image', fitsimage = 'f'+str(field)+'_cont_cropped.fits') # ======================== Measure flux with UVMODELFIT ================== # calculate offset from phase center in arcsec pixscale = 0.03 # must match 'cell' dx = pixscale*(320.0-xc) # offset to east (left) dy = pixscale*(yc-320.0) # offset to north (up) # measure flux as gaussian uvmodelfit(vis = 'f'+str(field)+'_cont.vis', comptype = 'G', sourcepar = [im_flux,dx,dy,0.5,1,0], varypar = [T,T,T,T,T,T], niter = 10) ''' reduced chi2=1.38594 I = 0.015002 +/- 0.00039735 x = -0.223229 +/- 0.00323111 arcsec y = -0.0874945 +/- 0.00277665 arcsec a = 0.0955957 +/- 0.0174087 arcsec r = 0.733013 +/- 0.326819 p = 24.0551 +/- 39.3193 deg consistent with aperture method 15:45:06.322 -34:17:38.287 '''