#!/usr/bin/env """ make line datacubes and integrated maps and compare applying continuum selfcal NOTE: this is intended to be an interactive, iterative process so this is more a log that should be run by cutting and pasting into casa rather than as an executable script search "CHANGEME" for variables to be changed 10/9/15 MCA """ # ================================== Setup ===================================== # III_1001 M1.5 II # 15:46:44.74 -34:30:35.6 field = 15 # CHANGEME fitspw = '2,3,4,7,8,9' # line-free channels for fitting continuum linespw = '0,1,3,5,6,8' # line spectral windows (C18O, 13CO, CN) robust = 0.5 # CHANGEME imsize = [640,640] cell = '0.03arcsec' imagermode = 'csclean' outframe = 'lsrk' veltype = 'radio' width = '1.0km/s' start = '-3km/s' nchan = 16 xc = 326 # CHANGEME yc = 302 # CHANGEME in_a = 80 out_a = 120 aper = 1.25 boxwidth = 300. box = rg.box([xc-boxwidth,yc-boxwidth],[xc+boxwidth,yc+boxwidth]) # ================ Create continuum subtracted line datasets =================== uvcontsub(vis = 'f'+str(field)+'.vis', # full vis file for this field spw = linespw, # line spw (for cont subtraction) fitspw = fitspw, # cont spw combine = 'spw', solint = 'int', fitorder = 1, want_cont = False) # should not be changed. # ============================== 13CO line ===================================== # first try on 13CO line as thats going to be the brightest # os.system('rm -rf f'+str(field)+'_13co32*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_13co32', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '330.58797GHz', niter = 500, threshold = 0, interactive = True, imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_13co32.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # can see peaks (resolved) # export cube to fits file fbase = 'f'+str(field)+'_13co32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_13co32.mom0*') immoments(imagename = 'f'+str(field)+'_13co32.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_13co32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[2km/s,6km/s]')) # CHANGEME (based on above analysis!!) # can see clear emission, gives best snr # export to fits file fbase = 'f'+str(field)+'_13co32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_max = imstat(imagename = 'f'+str(field)+'_13co32.mom0')['max'][0] im_rms = imstat(imagename = 'f'+str(field)+'_13co32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_13co32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 1292.32 mJy, rms = 32.86 mJy, S/N = 39.3 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_13co32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_13co32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_13co32.mom0_cropped.image', infile = 'f'+str(field)+'_13co32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_13co32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_13co32.mom0_cropped.fits') ''' Measuring COG for M/f15_13co32.mom0_cropped.fits Assuming object center (300.0,300.0) Background: -0.26 mJy/beam km/s RMS in annulus 4.0-6.0 arcsec = 33.43 mJy/beam km/s i radius flux err snr (asec) (mJy) (mJy) 0 0.10 61.06 9.59 6.4 1 0.20 185.53 25.87 7.2 2 0.30 334.27 38.77 8.6 3 0.40 467.04 56.06 8.3 4 0.50 611.28 65.33 9.4 5 0.60 735.94 80.52 9.1 6 0.70 844.90 77.45 10.9 7 0.80 963.82 84.52 11.4 8 0.90 1101.49 79.35 13.9 9 1.00 1213.67 96.42 12.6 10 1.10 1273.96 108.04 11.8 11 1.20 1297.63 106.59 12.2 12 1.30 1284.45 145.86 8.8 13 1.40 1259.46 126.88 9.9 14 1.50 1240.94 145.22 8.5 F = 1297.63 mJy E = 106.59 mJy S = 12.17 D = 2.40 arcsec ''' # ======================== C18O line ========================================== # don't bother with selfcal as it doesn't help... # os.system('rm -rf f'+str(field)+'_c18o32*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_c18o32', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '329.33055GHz', niter = 500, threshold = 0, interactive = False, mask = 'f15_cont_mask.crtf', imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # could not see line clearly, so just cleaned lightly # within continuum region for all channels at once # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_c18o32.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # export cube to fits file fbase = 'f'+str(field)+'_c18o32' os.system('rm -rf '+fbase+'.cube.fits') exportfits(imagename=fbase+'.image',fitsimage=fbase+'.cube.fits') # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_c18o32.mom0*') immoments(imagename = 'f'+str(field)+'_c18o32_b4sc.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_c18o32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[2km/s,6km/s]')) # CHANGEME (based on above analysis!!) # can't see line clearly so will use same velocity range as 13co32 # export to fits file fbase = 'f'+str(field)+'_c18o32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_rms = imstat(imagename = 'f'+str(field)+'_c18o32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_c18o32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 150.14 mJy, rms = 38.30 mJy, S/N = 3.9 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_c18o32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_c18o32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_c18o32.mom0_cropped.image', infile = 'f'+str(field)+'_c18o32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_c18o32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_c18o32.mom0_cropped.fits') ''' Measuring COG for M/f15_c18o32.mom0_cropped.fits Assuming object center (300.0,300.0) Background: 0.11 mJy/beam km/s RMS in annulus 4.0-6.0 arcsec = 37.26 mJy/beam km/s i radius flux err snr (asec) (mJy) (mJy) 0 0.10 22.71 11.06 2.1 1 0.20 58.54 23.96 2.4 2 0.30 82.12 39.06 2.1 <-- ND 3 0.40 90.42 56.57 1.6 4 0.50 65.14 67.00 1.0 5 0.60 18.63 90.52 0.2 6 0.70 12.87 88.97 0.1 7 0.80 42.57 120.94 0.4 8 0.90 62.50 107.33 0.6 9 1.00 80.21 140.06 0.6 10 1.10 113.26 128.61 0.9 11 1.20 150.29 123.29 1.2 12 1.30 136.39 127.29 1.1 13 1.40 100.83 132.17 0.8 14 1.50 137.29 129.09 1.1 F = 150.29 mJy E = 123.29 mJy S = 1.22 D = 2.40 arcsec ''' # ======================== Image CN ================== # don't bother with selfcal as it doesn't help... # os.system('rm -rf f'+str(field)+'_cn32_b4sc*') clean(vis = 'f'+str(field)+'.vis.contsub', imagename = 'f'+str(field)+'_cn32_b4sc', mode = 'velocity', start = start, width = width, nchan = nchan, outframe = outframe, veltype = veltype, restfreq = '340.24777GHz', niter = 2000, threshold = 0, interactive = True, imsize = imsize, cell = cell, weighting ='briggs', robust = robust, imagermode = imagermode) # use viewer to check channel maps and spectrum # make sure that velocity range is adequate and continuum subtraction ok imview(raster = [{'file':'f'+str(field)+'_cn32_b4sc.image'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # redo moment0 maps (now excluding noisy first channel!!) # os.system('rm -rf f'+str(field)+'_cn32.mom0*') immoments(imagename = 'f'+str(field)+'_cn32_b4sc.image', # CHANGEME (based on above analysis!!) outfile = 'f'+str(field)+'_cn32.mom0', moments = [0], includepix = [-10.0,100.0], chans = ('range=[2km/s,6km/s]')) # CHANGEME (based on above analysis!!) # can see clearl emission, best snr # export to fits file fbase = 'f'+str(field)+'_cn32.mom0' os.system('rm -rf '+fbase+'.fits') exportfits(imagename=fbase,fitsimage=fbase+'.fits') # measure flux im_rms = imstat(imagename = 'f'+str(field)+'_cn32.mom0', region='annulus[['+str(xc)+'pix,'+str(yc)+'pix],['+str(in_a)+'pix,'+str(out_a)+'pix]]')['rms'][0] im_flux = imstat(imagename = 'f'+str(field)+'_cn32.mom0', region='circle[['+str(xc)+'pix,'+str(yc)+'pix],'+str(aper)+'arcsec]')['flux'][0] print 'Flux = {0:.2f} mJy, rms = {1:.2f} mJy, S/N = {2:.1f}'.format(1000*im_flux, 1000*im_rms, im_flux/im_rms) # Flux = 3018.34 mJy, rms = 24.98 mJy, S/N = 120.8 # view continuum and gas imview(raster=[{'file':'f'+str(field)+'_cn32.mom0'}], contour = [{'file':'f'+str(field)+'_cont.fits'}]) # re-center image on source and use measure.py to get COG flux # os.system('rm -rf f'+str(field)+'_cn32.mom0_cropped*') ia.fromimage(outfile = 'f'+str(field)+'_cn32.mom0_cropped.image', infile = 'f'+str(field)+'_cn32.mom0.fits', region = box ) ia.close() exportfits(imagename = 'f'+str(field)+'_cn32.mom0_cropped.image', fitsimage = 'f'+str(field)+'_cn32.mom0_cropped.fits') ''' diameter total rms snr 3.2 3244.09 230.523 14.1 diameter total rms snr 4.2 2879.66 157.228 18.3 diameter peak rms snr 0.4 229.08 26.316 8.7 '''